DV+ T9356 (Suits Dodge Dart, BMW F30 335i,F20, F21 M135i & Fiat Abarth)

Part No. T9356

dv+ Blow off Valve or BOV/ diverter valve with TMS advantage. Worldwide Patent and design patent pending

Order now and get this part on Friday 23rd of March 2018*

* Orders to regional areas may take longer to ship

Please note that we will be closed from 22/12/2016 to 4/01/2017 and orders placed during this time may take longer to deliver

DV Plus T9356 Car and Product Comp 1

Introducing the new DV+ 

Suits Dodge Dart, BMW and Fiat Abarth Applications 


GFB’s DV+ solution couldn’t be simpler - keep what works and replace what doesn’t.

Worldwide Patent and Design Patent Pending

  • Retains the factory solenoid coil for seamless integration
  • Replaces plastic valve parts with metal for reliability and strength on chipped engines
  • Direct-fit replacement with GFB’s TMS benefits
  • Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances.

The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story on the next page.


Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds.

The DV+ story: Better performance - more reliable

Exploded view labels snagit

Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.

However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.


Common OE Problem #1
The diaphragm types are commonly known to rupture, especially when boost and temperature are increased as a result of chip tuning.


Common OE Problem #2
The plastic piston-type leaks far more than most people realise (by design, not from wear), and doesn’t always close after a high-boost gear shift.

Additionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.

With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity - more of a compromise than a solution.

GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.

The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructable metal components ensures strength and reliability no matter how much boost you run.

That's not all. Rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.

This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.

Unnecessary replacement kits are a compromise, not a solution


 Patent and Design Patents Pending 


DV+ Tech Tip 






More about DV+ Performance Diverter Range

WHEN you want no noise, no nonsense, just performance

European manufacturers are pushing their engines to the limit. Get a DV to match.

GFB’s DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles.

PCT Patents Pending

By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-oriented product that offers the following benefits:

  • Sharper throttle response
  • Faster boost recovery on gearshift
  • Solves boost leaking issues
  • Built to last


GFB DV+ T9351 Assembly


How the GFB DV+ Works


Product Reviews

We value feedback from our customers. If you'd like to leave a review for this product, please complete the form below.

I have to say, this diverter valve is amazing! The capabilities of holding boost higher in to the rpm range is unbelievable. Where I was typically dropping to 10-12psi around 6000 RPM's, it's now around 15-16psi. The part was extremely easy to install, which only took me about 20 mins from start to finish. The parts appear to be made of high end quality material and seems to be very durable. Once again, thanks for all of the great support I have received from the team working for Go Fast Bits


Solved my audible boost leak I was hearing when accelerating. Holds boost efficiently which improves throttle response through out the entire rpm range. Operations are quick, crisp and minimal flutter. Comes with the option of sport or normal modes when assembling. Overall great product, recommend to everyone who wants more efficiency.


Thank you for transforming my car. The Abarth in stock form drops boost levels and the car's acceleration falls flat on its face as soon as you back out of the throttle. After installing the DV, the car's drive-ability is improved drastically. I hope that GFB can work with Garrett or IHI to workout an OEM supply because this is incredible. If you're considering other mods, that's fine and dandy; just make sure to get this one first. I know that I wished I had got this one first. Much better bang for the buck than anything else I've installed - and, the ported throttle body really helped!

Brodey A Dover

A great product. Solved my full throttle whistle. Car is definitely pulling much harder. I have a intake and piggyback, This is making those mods work better. Thanks.


Review this product!

Because our Website guys aren't necessarily our Tech guys, we ask that if you have a specific question, please visit the contact us page. This way we'll be able to answer your query quicker!

How many wheels does a typical car have?:

DV+ T9356 (Suits Dodge Dart, BMW F30 335i,F20, F21 M135i & Fiat Abarth) also suits:

Ask our experts a question


Your Question:


Saturday, 02 December 2017
Installed the diverter valve a week ago. First, it’s a truly high quality product. Much better than the flimsy diaphragm it replaced. Improved throttle response significantly on my 135i e82 n55 with DCT. No codes displayed. Works perfectly. It was although a pain to install. On the 135i n55 I had to remove the water pump which required coolant refilll etc. Although, totally worth it.
International Shopper
Dear ,
You already have written a review for this product. Thank you.